Fabrication: Spray Booth & Casting Room
Summer 2024: NO ACCESS
*Sunday, May 5th 2024, will be the last day to work or store items in any of our existing fabrication studios, or return items to the Tool Center. We will reopen in the Fall at our new location in Double Ground*
2nd Floor
Main Building
Current Students, Faculty, and Staff may access the Spray Booth & Casting Room during open building hours.
Due to academic program needs and the large volume of students that this space supports, CCA Shops are not available to alumni at this time.
Covid Informational Links:
About the Fabrication: Spray Booth & Casting Room
The Spray Booth & Casting Room is an open-access space for using aerosol cans and working with resins, paints, and solvents. The booth is itself is a 136 square foot Cross-draft Booth supplied with a pneumatic air connection and regulator for use of a spray/finishing gun. The Casting Room is a dedicated mold making and casting space for resins, silicones, and rubbers.
Note: Respirators are required to be used while working in the Spray Booth, but cannot be checked out from the Tool Center.
** The use of Spray Adhesive is not allowed anywhere on CCA campus. **
The Spray Room also acts as the collection site for hazardous waste for the 2nd floor shops and studios. There are dedicated waste drums for aerosol cans as well as contaminated rags and fabrication materials. Please ask Studio Management if there are any questions.
Specializing in These Materials
- Paint
- Polymers
- Resin
- Rubber
- Silicone
Tools and Equipment
- Crossdraft Spray Booth
- Drying Racks
- MultiPRO Air Scubber w/ VOC filter package
- Casting Pressure Pot
- Exhaust Fan w/ snorkel
- Flammable Cabinets for Product Storage
- Hazardous Waste Collection Drums